36" Black cable railing system

36" Black cable railing system

1、Overview

   

         On this page, we will introduce the 36" black cable railing system in some scenarios. These scenarios are common to daily requests, so you will probably find exactly the same as your project on this page. If that's the case and you are not sure what to get, just follow the product combination on this page.

       

         Please note, however, that the product recommendations are just popular choices and can’t represent every individual DIY need. Also, for your safety, please be sure to understand and confirm local building codes to ensure your project is compliant.

       

         We want to make the cable railing easy and afforable. We believe you will do a great job building your cable railing system! 

       

    1.1 System includes

       

      (1)Stainless steel posts
      (2)Stainless steelhandrail
      (3)Cable railingkit
      (4)Stainlesssteel cable
      (5)Accessory
      (6)Tools

         

      1.2 Tips

          

        (1)The recommended post spacing between two posts is 3ft-4ft, no more than 4ft. For our 6'6" handrails, it would be best to use 3'3" post spacingfor a nicer appearance with fewer seams.
           
        (2)The total height of the railing (including the handrail) should be at least36" to meet the residential building codes (required by most states).
            
        (3)3"cable spacing and 200lbs of tension on each cable line is recommended in order to pass the 4" sphere test (required by most states).
           
        (4)In some cornersor long-distance projects, we recommend using 2 posts at the corner to prevent cable loosing or weak tension.
           
        (5)Please refer tothe item page to understand how each item works and why they can be combined as a system.
           
        (6)Please adjust the quantity of each item according to the actual situation and the above rules.
           

        2、Application Scenarios

           

               You may find the same scenarios below as your own project. Just go ahead and select from the recommended item list to avoid ordering wrong items.

             

          2.1 Linear scenario

             

                 The following is a linear scenario. We recommend using cable railing kit CR26, which contains both tensioners and terminals, in the following scenarios, preferably with a reach of less than 25ft.

             

               

            (1)Posts: PS01 BH4S——level posts
            (2)Handrail: HT10 BP4
              Handrail extension connector: HA01 BNP
              Handrail end caps: HA12 BNP
            (3)Cable railing kit: CR26
            (4)Adhesive washers: CR91
            (5)Wheel protector sleeve: CR90
            (6)Coated wire rope: WR17
            (7)Crimper and cutter: CK12
            (8)Socket wrench: CT16
                 

            2.2 L-shape scenario

               

                   The following is a corner scenario. We recommend splitting the cable runs at each corner, preferably with each run having a reach of less than 25ft. This system uses cable railing tensioner CR36 and terminal CR07 to make the one-post corner work.

                

               

              (1)Posts: PS01 BH4S —— level drilled posts
                PS01 BC4S —— L-corner drilled posts
              (2)Handrail: HT10 BP4 
                Handrail extension connector: HA01 BNP
                Handrail corner connector: HA02 BNP
                Handrail end caps: HA12 BNP
              (3)Cable railing tensioner: CR36
                Cable railing terminal: CR07
              (4)Adhesive washers: CR91
              (5)Wheel protective sleeve: CR90
              (6)Coated wire rope: WR17
              (7)HCrimper and cutter : CK12
              (8)Socket wrench: CT16

               

              2.3 U-shape scenario

                 

                     The following is a U-shape scenario, often seen on balconies and decks. We recommend splitting the cable runs and using two posts at each corner to make the system easier and avoid cable loosing. This system uses cable railing kit CR26, which contains both tensioners and terminals, in the following scenarios, preferably with a reach of less than 25ft.

                  

                (1)Posts: PS01 BH4S——level posts
                (2)Handrail: HT10 BP4
                  Handrail extension connector: HA01 BNP
                  Handrail corner connector: HA02 BNP
                  Handrail end caps: HA12 BNP
                (3)Cable railing kitt: CR26
                (4)Adhesive washers: CR91
                (5)Wheel protective sleeve: CR90
                (6)Coated wire rope: WR17
                (7)Crimper and cutter set: CK12
                (8)Socket wrench: CT16

                 

                2.4 Level toangle scenario

                   

                       The following is a level to angle scenario, often seen on stairs, which includes both horizontal and angled applications. We recommend using wheel protector sleeve CR90 at the transition post to bear the tension. This system uses cable railing kit CR26, which contains both tensioners and terminals.The cable can only go through one corner, and after the corner the tension of the cable will decrease, so we recommend preferably with a total reach of less than 20ft in the following scenarios.

                   

                  (1)Posts: PS01 BH4S——level posts
                    PS01 BA4S——angle posts
                  (2)Handrail: HT10 BP4
                    Handrail extension connector: HA01 BNP
                    Handrail transition connector: HA23 BNP
                    Handrail end caps: HA12 BNP
                  (3)Cable railing kit: CR26
                  (4)Adhesive washers: CR91
                  (5)Wheel protective sleeve: CR90
                  (6)30° Angle washer: CR60
                  (7)Wire rope: WR17
                  (8)Crimper and cutter: CK12
                  (9)Socket wrench: CT16
                     

                  2.5 Common deck scenario

                     

                       The following is a common deck scenario, which includes both deck and stairs. For this complex scenario, we can refer to the above prodct combination to divide this scenario to make it much On the deck, we can adpot the L-shape or U-shape scenario. On this stairs, we can adopt the linear scenario. Please note that the stairs requires the angle washer CR60 with the cable railing kit to play as the angle filler.
                      
                     
                  (1)Posts: PS01 BH4S——level posts
                    PS01 BA4S——angle posts
                    PS01 BC4S——corner posts
                  (2)Handrail: HT10 BP4
                    Handrail extension connector: HA01 BNP
                    Handrail corner connector: HA02 BNP
                    Handrail end caps: HA12 BNP
                  (3)Cable railing kit: CR26
                    Cable railing tensioner: CR36
                    Cable railing terminal: CR07
                  (4)Adhesive washers: CR91
                  (5)Wheel protective sleeve: CR90
                  (6)30°Angle washer:CR60
                  (7)Wire rope: WR17
                  (8)Crimper and cutter set: CK12
                  (9)Socket wrench: CT16

                  3、Free design service

                    

                       You're done! Is it easy to build a cable railing system? We believe that after reading this page you will have a good understanding of the cable railing system. You will do a great job on your project and build a modern and elegant cable railing system!We work with every effort to provide quality products and professional service. Please do not hesitate tocontact us if you have any questions!
                     
                       We offer custom cable railing design service for free. If these scenarios still don't meet your needs, please click on this picture to find us for a free solution design. Our experts will do all the planning, design and budgeting work for you at no extra charge.